Epoxy Mortar Flooring Resurfacing Systems | Urethane Cement Flooring Products

Urethane cement flooring systems. Epoxy mortar flooring finish products. Aggregate-filled, fluid-applied systems that help dissipate impact across the floor. Ultra-high point load, high compressive strength floor repair systems. Options for extreme environments, including thermal shock-resistant floors. Elastomeric concrete floor toppings to absorb machine vibration. Waterproofing resurfacers for mezzanines and upper levels. Utilitarian or decorative slip-resistant finishes.

FloroCrete SLX Slurry Urethane Mortar System

FloroCrete SLX Slurry Urethane Mortar System

FloroCrete SLX is a solvent-free, low odor, and slurry broadcast applied self-leveling urethane cement flooring system. It is specially formulated for areas where thermal shock, impact, and chemical attack are issues. It allows moisture to move through it at a safe rate. It is installed from a 1/8” neat system to a 3/16” with a media broadcast thickness. FloroCrete SLX urethane cement flooring is ideally suited for: Kitchen floors and Fryer Areas, Vehicle Service Area Floors, Food Processing Plant Floors, Brewery floors, Winery floors, Dairy floors, Walk-In Coolers & Freezers, Bottling Facility floors, Laboratory floors, Chemical Processing Floors, Sanitation & Wash-down Areas.

Information Links:

Florobuild PT/HT Epoxy Mortar Troweled Overlay

Florobuild PT/HT Epoxy Mortar Troweled Overlay

FloroBuild epoxy mortar system used for resurfacing or leveling deteriorated or spalled concrete floors. Economically adding performance and durability, this epoxy mortar system provides a sanitary, skid-resistant surface that easily tolerates the harsh environments found in factory settings. FloroBuild is available in both a hand trowel and power trowel epoxy mortar floor coating version. Used in Commercial, Industrial and Institutional applications, such as Heavy Industry, Foundries, Breweries, Loading Docks, Bottling Plants, and Wastewater Treatment Facilities. Product Advantages include: Seamless sanitary floor and coving, meets USDA requirements for incidental food contact in federally-inspected meat and poultry plants, excellent impact resistance and hardness, and a variety of colors can be achieved with the addition of Florock 100% Solids Colorants.

Information Links:

Florobuild XT for Extreme Conditions

Florobuild XT for Extreme Conditions

FloroBuild XT is an extra tough epoxy mortar floor repair material used for resurfacing or leveling extremely deteriorated or spalled concrete. Its proprietary fillers, which contain several gradations of steel, add extra tough abrasion and wear performance to the epoxy mortar material system. This makes for a tougher surface that can absorb and dissipate shock from impact. It provides a non-porous, sanitary, skid-resistant surface that easily tolerates the harsh environments found in many settings. FloroBuild XT epoxy mortar floor coating is available natural or in various colors and is ideally suited for commercial, industrial, and institutional applications such as Solid Waste Transfer Facilities, Loading Docks, and Dumpster Pads.

Information Links:

Floroshop Epoxy Aggregate Floor Coating

Floroshop Epoxy Aggregate Floor Coating

FloroShop is a silica-filled, 100% solids, zero V.O.C. epoxy aggregate flooring system that restores deteriorated concrete floors and offers economical protection in situations where slippage, abrasion, or moderate impact concerns. Aggregate-filled epoxy floors such as these provide a safe and durable option for industrial settings. Very easy to clean and maintain, these impervious epoxy aggregate coated floors prevent concrete dusting and retain their high performance over time. A hard-working, skid-resistant flooring value, FloroShop epoxy aggregate floor coating may be installed using a variety of textures, topcoat, and finishes.

Information Links:

FloroCrete RT Rake Trowel Urethane Mortar Flooring System

FloroCrete RT Rake Trowel Urethane Mortar Flooring System

FloroCrete RT is a solvent-free, low odor, rake, and trowel-applied urethane cement flooring slurry broadcast system that is designed for the most strenuous uses and activity. It is specially formulated for areas where thermal shock, heavy impact, and chemical attack are issues. The urethane cement flooring system allows moisture to move through it at a safe rate and it can be installed from a 3/16” to 1/4” thickness. System Advantages include: CA 01350 Air Quality Compliant; ADA Compliant; LEED Credits Available; Meets FDA, USDA & CFIA Standards; VOC Compliant/Low Odor; Thermal Shock Resistant; Heat Resistant to 235 degrees F; Contains Antimicrobial Additive; No Topcoat Required; Tolerates Dampness; High Chemical & Abrasion Resistance; Can be Applied to 7 to 14-Day-Old Concrete.

Information Links:

FloroCrete HD Heavy Duty Urethane Mortar System

FloroCrete HD Heavy Duty Urethane Mortar System

FloroCrete HD is a solvent-free, low odor, heavy-duty, one-step, trowel-applied urethane cement mortar floor coating system known for its thermal shock, heavy impact, abrasion, and chemical resistance. It allows moisture to move through it at a safe rate. The urethane mortar system can be installed from a 1/4” to 3/8” thickness. These hard-working urethane cement flooring systems, with their slip-resistant, antimicrobial and chemical-resistant properties, give you the same sanitary and easy-to-maintain finish day after day, regardless of your high-pressure steam cleaning, boiling liquid spills and other environmental factors. Even the punishing, higher temperature environment beneath industrial and commercial ovens are no match for our thermal shock resistant urethane cement flooring.

Information Links:

Additional information about these commercial and industrial strength epoxy mortar floor coating systems and urethane cement floor coating materials:

FloroCrete SLX 3.0 Self-Leveling Slurry Broadcast Urethane Mortar

Product Description: FloroCrete SLX is a solvent-free, low odor, slurry-broadcast applied, self-leveling flooring system. It is specially formulated for areas where thermal shock, impact and chemical attack are issues. It allows moisture to move through it at a safe rate. System thickness can vary from 1/8” for a neat system to 3/16” when broadcasting with choice of media.

Typical Uses, Applications: FloroCrete SLX may be used as a part of the Florock FloroProof moisture mitigation system (contact your Florock rep for details) and is suited for commercial, industrial and institutional applications, such as:

  • Kitchens/Fryer Areas
  • Vehicle Service Areas
  • Food Processing Plants
  • Breweries, Wineries & Dairies
  • Walk-In Coolers & Freezers
  • Bottling Facilities
  • Laboratories
  • Suitable for Indoor & Outdoor use
  • Chemical Processing
  • Sanitation & Wash-down Areas

Product Advantages:

  • CA 01350 Air Quality Compliant
  • ADA Compliant
  • LEED Credits Available
  • Meets FDA, USDA & CFIA Standards
  • VOC Compliant/Low Odor
  • Thermal Shock Resistant
  • Heat Resistant to 235º F
  • Contains Antimicrobial Additive
  • No Topcoat Required
  • Tolerates Dampness
  • High Chemical & Abrasion Resistance
  • Can be applied to 7 to 14 day old concrete

System Physical Properties

Compressive Strength ASTM C579 9,000 psi

Tensile Strength ASTM D638 4,200 psi

Flexural Strength ASTM D790 5,100 psi

Hardness, Shore D ASTM D2240 85

Bond Strength ASTM D4541 >400 psi

Co-Efficient of Friction ASTM D-2047 Passes ADA Recommendations

Co-Efficient of Thermal Expansion ASTM C531 1.1×10-5 in/in/ºF

Impact Resistance ASTM D2794 >160 in lbs.

Flammability ASTM E-648 Class I

Abrasion Resistance ASTM D4060 40 mg loss

Indoor Air Quality CA 01350 Compliant

Water Absorption ASTM C413 0.04%

Resistance to Fungi Growth ASTM G21 Passes

VOC EPA Method 24 0

Service Temperature Lab Test -100º F to 235º F

Workable Life 1 Mixed Kit 15 min.

 

FloroCrete RT 3.0 Rake/Trowel Slurry Broadcast Urethane Mortar

Product Description: FloroCrete RT is a solvent-free, low odor, rake/trowel slurry broadcast system that is designed for the most strenuous uses and activity. It is specially formulated for areas where thermal shock, heavy impact and chemical attack are issues. It allows moisture to move through it at a safe rate and it can be installed from a 3/16” to 1/4” thickness.

Typical Uses, Applications: FloroCrete RT may be used as a part of the Florock FloroProof Moisture Mitigation System (contact your Florock Representative for details) and is ideally suited for commercial, industrial and institutional applications, such as:

  • Kitchens/Fryer Areas
  • Vehicle Service Areas
  • Food Processing Plants
  • Breweries, Wineries & Dairies
  • Walk-In Coolers & Freezers
  • Bottling Facilities
  • Laboratories
  • Suitable for Indoor & Outdoor Use
  • Chemical Processing
  • Sanitation & Wash-Down Areas

Product Advantages:

  • CA 01350 Air Quality Compliant
  • ADA Compliant
  • LEED Credits Available
  • Meets FDA, USDA & CFIA Standards
  • VOC Compliant/Low Odor
  • Thermal Shock Resistant
  • Heat Resistant to 235º F
  • Contains Antimicrobial Additive
  • No Topcoat Required
  • Tolerates Dampness
  • High Chemical & Abrasion Resistance
  • Can be Applied to 7 to 14-Day-Old Concrete

System Physical Properties

Compressive Strength ASTM C579 9,000 psi

Tensile Strength ASTM D638 4,200 psi

Flexural Strength ASTM D790 5,100 psi

Hardness, Shore D ASTM D2240 85

Bond Strength ASTM D4541 >400 psi

Co-Efficient of Friction ASTM D-2047 Passes ADA Recommendations

Co-Efficient of Thermal Expansion ASTM C531 1.1×10-5 in/in/ºF

Impact Resistance ASTM D2794 >160 in lbs.

Flammability ASTM E-648 Class I

Abrasion Resistance ASTM D4060 40 mg loss

Indoor Air Quality CA 01350 Compliant

Water Absorption ASTM C413 0.04%

Resistance to Fungi Growth ASTM G21 Passes

VOC EPA Method 24 0

Service Temperature Lab Tested -100º F to 235º F

Workable Life* 1 Mixed Kit 15 minutes

 

FloroCrete HD 3.0 Trowel Grade Urethane Mortar

Product Description: FloroCrete HD is a solvent-free, low odor, heavy-duty, one-step, trowel-applied mortar known for its thermal shock, heavy impact, abrasion, and chemical resistance. It allows moisture to move through it at a safe rate and can be installed from 1/4” to 3/8” thickness.

Typical Uses, Applications: FloroCrete HD may be used as a part of the Florock FloroProof Moisture Mitigation System (contact your Florock representative for details) and is ideally suited for commercial, industrial and institutional applications, such as:

  • Kitchens/Fryer Areas
  • Vehicle Service Areas
  • Food Processing Plants
  • Breweries, Wineries & Dairies
  • Walk-In Coolers & Freezers
  • Bottling Facilities
  • Laboratories
  • Suitable for Indoor & Outdoor Use
  • Chemical Processing
  • Sanitation & Wash-Down Areas

Product Advantages:

  • CA 01350 Air Quality Compliant
  • ADA Compliant
  • LEED Credits Available
  • Meets FDA, USDA & CFIA Standards
  • VOC Compliant/Low Odor
  • Thermal Shock Resistant
  • Heat Resistant to 235º F
  • Contains Antimicrobial Additive
  • No Topcoat Required
  • Tolerates Dampness
  • High Chemical & Abrasion Resistance
  • Can be Applied to 7 to 14 Day Old Concrete

System Physical Properties

Compressive Strength ASTM C579 9,000 psi

Tensile Strength ASTM D638 4,200 psi

Flexural Strength ASTM D790 5,100 psi

Hardness, Shore D ASTM D2240 85

Bond Strength ASTM D4541 >400 psi

Co-Efficient of Friction ASTM D-2047 Passes ADA Recommendations

Co-Efficient of Thermal Expansion ASTM C531 1.1×10-5 in/in/ºF

Impact Resistance ASTM D2794 >160 in lbs.

Flammability ASTM E-648 Class I

Abrasion Resistance ASTM D4060 40 mg loss

Indoor Air Quality CA 01350 Compliant

Water Absorption ASTM C413 <0.1%

Resistance to Fungi Growth ASTM G21 Passes

VOC EPA Method 24 0

Service Temperature Lab Test -100º F to 235º F

Workable Life* 1 Mixed Kit 15 min.

 

FloroBuild Epoxy Mortar Troweled Overlay

Product Description: FloroBuild is used for resurfacing or leveling deteriorated or spalled concrete floors. Economically adding performance and durability, this system provides a sanitary, skid-resistant surface that easily tolerates the harsh environments found in factory settings. FloroBuild is available in both a hand trowel and a power trowel version.

Typical Uses: Commercial, Industrial and Institutional applications, such as:

  • Heavy Industry
  • Foundries
  • Breweries
  • Loading Docks
  • Bottling Plants
  • Wastewater Treatment Facilities

Product Advantages:

  • Seamless sanitary floor and coving
  • Meets USDA requirements for incidental food contact in federally-inspected meat and poultry plants
  • Excellent impact resistance and hardness
  • A variety of colors can be achieved with the addition of Florock 100% Solids Colorants

Cured Physical Properties

Compressive Strength ASTM C-579 11,600 PSI

Tensile Strength ASTM C-307 2,000 PSI

Flexural Strength ASTM C-580 5,100 PSI

Flexural Modulus of Elasticity ASTM C-580 2.0x10E6 PSI

Indentation MIL-D-3134F No Indent.

Impact Resistance ASTM D-2794 >160 in/lbs

Shore D Hardness ASTM D-2240 90

Water Absorption ASTM C-413 0.2%

Bond Strength ACI Comm. #503 Pg. 1139-41 >400 PSI

Abrasion Resistance CS-17 Wheel, 1,000 gm load, 1,000 cycles ASTM D-4060 38 mg

Heat Resistance

Continuous 140°F / 60°C

Intermittent 200°F / 93°C

Coefficient of Friction ASTM F-1679 Or ASTM F-2508 0.84 (dry) 0.68 (wet)

Flammability ASTM D-648 Class I

Thermal Coefficient of Linear Expansion ASTM C-531 2.0×10-5 in/in/°C

 

FloroBuild XT FOR EXTREME CONDITIONS

Product Description: FloroBuild XT is an extra tough epoxy mortar used for resurfacing or leveling extremely deteriorated or spalled concrete. Its proprietary fillers, which contain several gradations of steel, add extra tough abrasion and wear performance. This makes for a tougher surface that can absorb and dissipate shock from impact. It provides a non-porous, sanitary, skid-resistant surface that easily tolerates the harsh environments found in many settings. FloroBuild XT is available natural or in various colors.

Typical Uses, Applications: Ideally suited for commercial, industrial and institutional applications which have:

  • Solid Waste Transfer Facilities
  • Loading Docks
  • Dumpster Pads
  • Any form of impact to the flooring surface

Product Advantages:

  • Superior compressive strength & wear resistance
  • Excellent impact resistance and hardness
  • Seamless sanitary floor and coving
  • Meets USDA requirements for incidental food contact in Federally Inspected Meat and Poultry Plants
  • A variety of colors can be achieved with the addition of Florock 100% Solids Colorants at 1 to 2 quarts per batch.

Cured Physical Properties

Compressive Strength ASTM C579 14,200 PSI

Tensile Strength ASTM D2370 7,300 PSI

Flexural Strength ASTM D790 4,600 PSI

Flexural Modulus of Elasticity ASTM C580 2.0 X 10E6 PSI

Indentation MIL-D-3134F No Indentation

Impact Resistance ASTM D4226 >160 in/lb

Shore Hardness ASTM D2240 90

Water Absorption ASTM C413 0.2%

Bond Strength ACI Comm. #503 pg 1139-41 >400 PSI

Abrasion Resistance, Taber Abrader CS 17 Wheel, 1000 gm load, 1000 cycles ASTM D4060 30 mg

Heat Resistance Limitation Continuous Exposure 140˚ F/60˚ C

Coefficient of Friction ASTM D2047 0.6 minimum

Flammability ASTM D635 Self -Extinguishing

Thermal Coefficient of Linear Expansion ASTM C531 1.8 x 10E-5 in/in/˚ F