Decorative Concrete Products, Specialty Concrete Materials, Commercial Industrial Concrete Floor Coating Systems
Decorative concrete products, specialty concrete materials, commercial industrial concrete floor coating systems. Concrete products available in Charlotte North Carolina and Raleigh North Carolina.
Thin Overlay Bag Mix
Stamped Concrete Products
Epoxy Metallic & Flake Materials
Concrete Colors, Stains, Dyes
Indoor Clear Sealer Product
Outdoor Clear Sealer Systems
Outdoor Colored Sealer Product
Indoor Colored Floor Coating
GFRC Casting Material Systems
Repair and Restoration Material
Surface Prep and Cleaning Products
Vertical Overlay Bag Mixes
-
Scanmaskin 32 World Series Propane Concrete Grinder 26hp
Brand: ScanmaskinScanmaskin 32 World Series Propane Concrete Grinder 26hp
The Scanmaskin 32 World Series Propane is a propane-powered Grinder for occasions when you do not have access to electric power. The 32 World Series Propane machine has the same unique characteristics as the other Grinders in the World Series Line.
Among other things, fully cast machine housing, adjustable grinding pressure, and well-balanced tooling heads that provide the efficient grinding results that characterize the World Series Line.
Financing Available – Request Information Today! -
SCR Concrete Cleaner and Degreaser with Acids
Brand: SureCreteSCR Concrete Cleaner and Degreaser with Acids
SCR is a three-in-one concentrated concrete cleaner, degreaser, and acid concrete etcher which is a safe alternative to muriatic acid for driveways, sidewalks, pool decks, patios and interior concrete. SCR is pH Balanced and environmentally friendly. Runoff water will not harm the landscape or aquatic life. SCR Concrete Cleaner Solution quickly dissolves mortar, scale, rust, algae, stains, and mineral deposits such as efflorescence.
-
DAY 1 Troweling Finishing Aid Colloidal Silica – Extend Fresh Concrete Workable Time
Brand: Solomon Colors Inc.DAY 1 Troweling Finishing Aid Colloidal Silica – Extend Fresh Concrete Workable Time
Day 1 is a concrete finishing aid by Solomon Colors, that should be on every Ready Mix job site. DAY1 FINISHING AID is a colloidal silica-based topical additive that makes concrete flatwork finishing easier and faster. It produces a better result and reduces the risk of a prematurely setting slab. Applied during floating and troweling, DAY1 increases cream, making for easier, better finishing and extended workable time under adverse conditions.
REQUEST CONTRACTOR PRICING BELOW:
-
ALL ALUMINUM CONCRETE PLACER WITHOUT HOOK by Bon Tools – 22-217
Brand: Bon ToolsALL ALUMINUM CONCRETE PLACER WITHOUT HOOK by Bon Tools – 22-217
• One-piece welded construction (head to handle)
• Welded brace
• Powder coated 60″ x 13/8″ handle
• 53/4″ textured grip on handle end (#51-115)
• Available with or without hook -
MAGNESIUM SCREED – 1 1/2″ X 3 1/2″ – 12′ by Bon Tools – 22-312
Brand: Bon ToolsMAGNESIUM SCREED – 1 1/2″ X 3 1/2″ – 12′ by Bon Tools – 22-312
• Extra thick edges and end caps won’t rust or load up with mud
• Replaceable plastic end caps (#50-132)
• High purity magnesium
• 11/2″ x 31/2″ -
BLUE STEEL FINISHING TROWEL – ROUND END – 18 X 4 – COMFORT WAVE HANDLE – Bon Tools 67-152
Brand: Bon ToolsBLUE STEEL FINISHING TROWEL – ROUND END – 18 X 4 – COMFORT WAVE HANDLE – Bon Tools 67-152
• Premium ground
• Professional grade trowels
• Long shank
• Choose from camelback wood or comfort wave handle -
CONCRETE FINISH BRUSH – 36″ WOOD BLOCK WITH MEDIUM STYRENE BRISTLES – Bon Tools 82-268
Brand: Bon ToolsCONCRETE FINISH BRUSH – 36″ WOOD BLOCK WITH MEDIUM STYRENE BRISTLES – Bon Tools 82-268
• Threaded hole for standard broom handle or use #12-319 adapter
• UV resistant fiber
• Blue medium styrene fiber holds its shape longer than poly brushes
• 3 rows
• 31/4″ trim -
Concrete Stamp Powder Release – Antique Release by Brickform 42 Colors
Brand: BRICKFORMConcrete Stamp Powder Release – Antique Release by Brickform 42 Colors
Premium concrete powder release – Antique Release by Brickform in stock in both our Charlotte and Raleigh North Carolina store locations. Add depth and dimensions to stamped concrete while preventing pull-up and reducing wear on texturing tools. Antique Release serves as a bond breaker and keep stamps from sticking to the surface of the concrete. At the same time, it adds antiquing and highlighting for more realistic, attractive stamped hardscapes.
-
Push/Pull V-Crack Filler Squeegee
Brand: Seymour/Midwest ToolsPush/Pull V-Crack Filler Squeegee
The “V” is at a 70 degree angle, using a 1/4″ x 2″ neoprene rubber blade. The 2″ height adds greater containment and control of the material.
• V-Crack Squeegee
• 70° Shape
• 2″ Neoprene
• Uses Tapered Wood Handle -
Polypropylene Spiked Shoes with 3/4″ Spikes (Pair)
Brand: Seymour/Midwest ToolsPolypropylene Spiked Shoes with 3/4″ Spikes (Pair)
• 3/4″ sharp spikes
• Snap lock buckle system
• 13 specially placed spikes per shoe
• Solvent-resistant durable polypropylene
• Flat-bed design -
Replacement Straps – Set of 4 for Poly Spiked Shoes
Brand: Seymour/Midwest ToolsReplacement Straps – Set of 4 for Poly Spiked Shoes
• Replacement Straps
• Set of 4 for Polyporpylene flat-bed Spiked Shoes -
Spike Shoe 1″ Replacement Rounded Steel Spikes (set of 26)
Brand: Seymour/Midwest ToolsSpike Shoe 1″ Replacement Rounded Steel Spikes (set of 26)
• 1″ Replacement Rounded Steel Spikes and nuts (set of 26)
• Fits polypropylene shoes -
Replacement Spikes for Shoe-In® Resinous Coatings Finishing Shoe – Sharp – Set of 32
Brand: Seymour/Midwest ToolsReplacement Spikes for Shoe-In® Resinous Coatings Finishing Shoe – Sharp – Set of 32
• Shoe-In® 3/4″ Sharp tip replacement spikes
• Set of 32 (16 per shoe)While Shoe-In® Spikes are extremely durable, we all know that spikes wear and need to be replaced for the best performance on your floor coatings. We offer two types of spikes:
-
Replacement Spikes for Resinous Coatings Shoe – Blunt – (Set of 32 – 16 per shoe)
Brand: Seymour/Midwest ToolsReplacement Spikes for Resinous Coatings Shoe – Blunt – (Set of 32 – 16 per shoe)
• Shoe-In® 1″ Rounded / Blunt tip replacement spikes
• Set of 32 (16 per shoe)While Shoe-In® spikes are extremely durable, we all know that spikes wear and need to be replaced for the best performance on your floor coatings. We offer two types of spikes:
-
Shoe-In® Concrete Finishing Shoe – Large
Brand: Seymour/Midwest ToolsShoe-In® Concrete Finishing Shoe – Large
Concrete Finishing & Resinous Floor Coating Shoes
Developed to make the concrete finisher’s life easier. These were designed to eliminate heel, and tread patterns from destroying stamped concrete. They also work well for concrete finishing, the spreading of release powders, and sealers on decorative concrete installations. They additionally work well for general concrete finishing or power troweling.SMALL: Fits Boot Size 8 & Under, Sneaker Size 8 & Under
MEDIUM: Fits Boot Size 8 to 9, Sneaker Size 8 to 9
LARGE: Fits Boot Size 10-11, Sneaker Size 10-12
X-LARGE: Fits Boot Size 12-16, Sneaker Size 13-16 -
Shoe-In® 3/4″ Spiked Shoes for Resinous Coatings – Small
Brand: Seymour/Midwest ToolsShoe-In® 3/4″ Spiked Shoes for Resinous Coatings – Small
• Slips over your shoes or boots In seconds
• No straps or buckles
• 3/4″ Spikes for Resinous / Epoxy floor coating installationAPPLICATIONS INCLUDE:
Installing Epoxy Coatings | Installing Concrete & Screed Floors Including Decorative Overlays
Industrial Environments | Renovations or Removals | Any Area Where Flooring Needs Protecting -
Shoe-In® Spiked Shoes for Resinous Coatings – Medium
Brand: Seymour/Midwest ToolsShoe-In® Spiked Shoes for Resinous Coatings – Medium
Concrete Finishing & Resinous Floor Coating Shoes
It’s never been easier to install epoxy coatings or self-leveling and decorative overlays. With a patented design, Shoe-In® Pro shoes are a fantastically simple and affordable solution with multiple applications.
• 3/4″ Spikes for Resinous / Epoxy floor coating installation
• Mark-Free installation
• Sharp or Rounded replacement spikes available -
Shoe-In® Spiked Shoes for Resinous Coatings – Large
Brand: Seymour/Midwest ToolsShoe-In® Spiked Shoes for Resinous Coatings – Large
Concrete Finishing & Resinous Floor Coating Shoes
• Slips over your shoes or boots In seconds
• No straps or buckles
• 3/4″ Spikes for Resinous / Epoxy floor coating installation
• Mark-Free installation
• Sharp or Rounded replacement spikes available -
Shoe-In® Spiked Shoes for Resinous Coatings – XLarge
Brand: Seymour/Midwest ToolsShoe-In® Spiked Shoes for Resinous Coatings – XLarge
Concrete Finishing & Resinous Floor Coating Shoes
It’s never been easier to install epoxy coatings or self-leveling and decorative overlays. With a patented design, Shoe-In® Pro shoes are a fantastically simple and affordable solution with multiple applications. Hands-free!
• 3/4″ Spikes for Resinous / Epoxy floor coating installation
• Mark-Free installation
• Sharp or Rounded replacement spikes availableSMALL: Fits Boot Size 8 & Under, Sneaker Size 8 & Under
MEDIUM: Fits Boot Size 8 to 9, Sneaker Size 8 to 9
LARGE: Fits Boot Size 10-11, Sneaker Size 10-12
X-LARGE: Fits Boot Size 12-16, Sneaker Size 13-16 -
Squeegee – Foam Blade 45 cm 18 Inch
Brand: Seymour/Midwest ToolsSqueegee – Foam Blade 45 cm 18 Inch
• Squeegee – Foam Blade 45 cm (18″)
Double edge foam squeegee with tapered handle adapter. Galvanized steel frame with reinforced handle socket.
-
4-1/2″ x 11″ x 1/2″ V-Notch Trowel
Brand: Seymour/Midwest Tools4-1/2″ x 11″ x 1/2″ V-Notch Trowel
Midwest Rake® S550 Professional™
• V-Notch Trowel
• 1/2″ Notch Depth
• Riveted
• 11″ x 4-1/2″ Overall Size -
18″ Magic Trowel® Smoother with Threaded Handle Adapter
Brand: Seymour/Midwest Tools18″ Magic Trowel® Smoother with Threaded Handle Adapter
Midwest Rake® S550 Professional™
• 18″ Magic Trowel® Smoother
• Threaded Handle Adapter -
24″ Magic Trowel® Smoother with Threaded Handle Adapter
Brand: Seymour/Midwest Tools24″ Magic Trowel® Smoother with Threaded Handle Adapter
Midwest Rake® S550 Professional™
• 24″ Magic Trowel® Smoother
• Threaded Handle Adapter -
Jiffy Mixer Blade – 2-5 Gallon Size
Brand: Seymour/Midwest ToolsJiffy Mixer Blade – 2-5 Gallon Size
Midwest Rake® S550 Professional™
• Jiffy Mixer Blade
• 2-5 Gallon -
24″ CAM® Gauge Rake Frame, Threaded Handle Adapter
Brand: Seymour/Midwest Tools24″ CAM® Gauge Rake Frame, Threaded Handle Adapter
Gauge Rake Frame, Threaded Handle Adapter
Midwest Rake® S550 Professional™ -
10″ CAM® Gauge Rake Frame, 10″ Hand-Held Handle w/Grip
Brand: Seymour/Midwest Tools10″ CAM® Gauge Rake Frame, 10″ Hand-Held Handle w/Grip
Midwest Rake® S550 Professional™
A patented “goof-proof” tool that applies materials at a precise, uniform depth. -
CAM® Set – Size 2, 3 Settings @1/8″ (Set of 2)
Brand: Seymour/Midwest ToolsCAM® Set – Size 2, 3 Settings @1/8″ (Set of 2)
Midwest Rake® S550 Professional™
self leveling / high performance floor coating materials -
CAM® Set – Size 3, 3 Settings @3/16″ (Set of 2)
Brand: Seymour/Midwest Tools -
CAM® Set – Size 4, 3 Settings @1/4″ (Set of 2)
Brand: Seymour/Midwest ToolsCAM® Set – Size 4, 3 Settings @1/4″ (Set of 2)
self leveling / high performance floor coating materials
-
CAM® Set – Size 6, 3 Settings @3/8″ (Set of 2)
Brand: Seymour/Midwest ToolsCAM® Set – Size 6, 3 Settings @3/8″ (Set of 2)
self-leveling / high-performance floor coating materials
• SKU: 57086
-
CAM® Set – Size 8, 3 Settings @ 1/2″ (Set of 2)
Brand: Seymour/Midwest ToolsCAM® Set – Size 8, 3 Settings @ 1/2″ (Set of 2)
Midwest Rake® S550 Professional™
self-leveling / high-performance floor coating materials -
24″ Sled-Style Gauge Rake
Brand: Seymour/Midwest Tools24″ Sled-Style Gauge Rake
Midwest Rake® S550 Professional™
• 24″ Sled-Style Gauge Rake
• Threaded Handle Adapter
• Anodized Aluminum Frame
• Replacement Sleds are available (SA30034) -
9″ Spiked Roller, 13/16″ Supersharp Tines
Brand: Seymour/Midwest Tools9″ Spiked Roller, 13/16″ Supersharp Tines
• Abrasion-Resistant Nylon Tines provide superior tool life
• 3/8″ End-Caps allow use with Medium-Duty Frame, or Heavy-Duty Aluminum Frame
• Designed for maximum effectiveness in releasing entrapped air and promoting self-leveling of coatings
• Engineered to improve the application characteristics of Resurfacing (Over/Underlayment) Products -
18″ Spiked Roller, 13/16″ Supersharp Tines
Brand: Seymour/Midwest Tools18″ Spiked Roller, 13/16″ Supersharp Tines
- Designed for maximum effectiveness in releasing entrapped air and promoting self-leveling of coatings
- Engineered to improve the application characteristics of Resurfacing (Over/Underlayment) Products
-
9″ Spiked Roller with 13/16″ Spikes on Radial Roller Frame
Brand: Seymour/Midwest Tools9″ Spiked Roller with 13/16″ Spikes on Radial Roller Frame
Midwest Rake® S550 Professional™
• 9″ Spiked Roller
• 13/16″ Spikes on Radial Roller Frame