SureSpray™ is a thin spray concrete overlay mix product that can create many different designs and textures on concrete floors. Sprayed from a hopper gun, you can create a wet bubble look or spray over stencils or tape patterns to create a unique tile look or even brick looking concrete on driveways, sidewalks, patios, and pool decks resurfacing.

Coverage Approx 125 – 175 square foot per 50 lb bag (Varies based on substrate and application)
VOC Rating 0 g/L
Shelf Life 1 year in the original unopened container
Mixing Ratio 4 – 6 quarts water per 50 lb bag
Base Color White
Curing Bases Summer & Winter Mix Designs
Density 126.1 lbs./cubic foot
Compressive Strength ASTM C-109: 4,278 PSI @ 28 days
Flexural Strength ASTM C-348: 995 PSI @ 28 days
Tensile Strength ASTM C-190: 440 PSI @ 28 days
Abrasion Resistance ASTM D-4060: less than 0.50% @ 28 days
Mosaic Shear ANSI A-118.4: 280 PSI @ 28 days

SPRAYING
1. Once the substrate has been properly prepped, ensure the surface is SSD (saturated surface dry) with no standing puddles.
2. The spray gun should have its tip adjusted/placed to 1⁄4" (6.3mm). Other size orifices can be used but will change the amount and flowability of the material.
3. Setting for air compression should be approximately 8 ft2 (.23m3) per minute at 40 psi (276 kPa) continuous.
4. Spray material straight down. The material should be placed at 100% coverage, this can be done by spraying in a circular motion, with material placed at the volume so it is almost flowing and self-leveling.

In Stock in both our Charlotte and Raleigh North Carolina store locations.

SureSpray | Thin Concrete Texture Overlay Bag Mix System

Pebble finish with integrally colored SureSpray thin concrete overlay material system

Non skid texture on pool deck with SureSpray material system. Photo courtesy of Sperling Inc.

Hide concrete cracks in plain site with concrete texture overlay and custom patterns

Spray Concrete Overlay Brick Stencil Pattern

D4