Scanmaskin 330 Concrete Grinder ScanCombiflex 13″ 120 – 230 – 400 Volt
Scanmaskin 330 Concrete Grinder ScanCombiflex 13″ 120 – 230 – 400 Volt
Scanmaskin Combiflex 330 is a powerful and easy to use the machine. It is one of the most versatile machines on the market. The 330 mm grinding disc is effective when grinding smaller areas, removal of tough coatings, and also works very nicely in preparatory work. With a simple maneuver, SC 330 can also be made into an edge grinder that can be adjusted for grinding in two different directions. The 330 mm disc on the SC 330 can be configured with 3, 6, or 9 of our metal or resin bond diamond tools. This allows the machine to cut more aggressively when necessary, or grind soft surfaces by spreading out the weight and using more tools. For smooth and simple transport the SC330 is easy to separate into two parts. 154 pounds.
Financing Available – Request Information Today!
Product Request
The 330 mm / 13-inch disc on the SC-330 can be configured with 3, 6, or 9 of our metal, ceramic, or resin bond diamond tools. This allows the machine to cut more aggressively when necessary, or grind softer surfaces by spreading out the weight and using more tools. For smooth and simple transport, the SC-330 can easily be separated into two parts, each weighing well under 100 lbs.
The ScanCombiflex 330 is available in several different power configurations, along with as single and variable speed (RS – regulated speed)
TECHNICAL SPECIFICATION 330
1-phase – 3 phase
Voltage: 110-120 V 1~ or 220-240 V 1~ Voltage: 400 V 3~
Motor power: 1,5 kW Motor power: 4 kW
Current: 20 Amp. or 10 Amp. Current: 16 Amp.
Frequency: 60 Hz or 50 Hz Frequency: 50-60 Hz
Grinding speed: 750 rpm or 600 rpm Grinding speed: 1430 rpm
Grinding disc: 1 x 330 mm / 1 x 13” Grinding disc: 1 x 330 mm / 1 x 13”
Grinding width: 330 mm / 13” Grinding width: 330 mm / 13”
Weight: 65 kg / 143 lbs. Weight: 65 kg / 143 lbs.
Other: CE-marking Other: CE-marking
TECHNICAL SPECIFICATION 330RS
1-phase – 3-phase
Voltage: 110-120 V 1~ or 220-240 V 1~ Voltage: 380-480 V 3~
Motor power: 1,1 kW or 1,5 kW Motor power: 4 kW
Current: 15 Amp. or 10 Amp. Current: 16 Amp.
Frequency: 50-60 Hz Frequency: 50-60 Hz
Grinding speed: 150-400 rpm or 250-750 rpm Grinding speed: 250-1500 rpm
Grinding disc: 1 x 330 mm / 13” Grinding disc: 1 x 330 mm / 13”
Grinding width: 330 mm / 13” Grinding width: 330 mm / 13”
Weight: 70 kg / 154 lbs. Weight: 70 kg / 154 lbs.
Other: CE-marking Other: CE-marking
Reload document 
Open in new tab 
