Rio-Coat ECR Novolac Epoxy

Rio-Coat ECR Novolac Epoxy

Acid/Chemical Resistant Colored Novolac Epoxy Seal
RIO COAT ECR Novolac is a two-component colored high solids novolac epoxy coating designed for application where splash and spills of acids, chemicals, and solvents occur.

Product Request
Shipping Zip Code(Required)

Recommended for a high build topcoat for traffic areas, chemical troughs and
curbs as well as tanks and chemical spill areas for cement masonry or brick.
SOLIDS BY WEIGHT:
96% (+/- 1%)
SOLIDS BY VOLUME:
94% (+/- 1%)
VOLATILE ORGANIC CONTENT:
Less than 44 g/l
STANDARD COLORS:
Light gray, medium gray, and tile red
RECOMMENDED FILM THICKNESS:
16-18 mils
COVERAGE PER GALLON:
90-100 square feet per gallon @ 16-18 mils
PACKAGING INFORMATION:
3 gallon kit (volume approximate)
15 gallon kits (volume approximate)
MIX RATIO:
10.15 pounds (1 gallon) part A to 4.2 pounds (.50 gallons) part B (volumes
approx.)
SHELF LIFE:
1 year in unopened containers
FINISH CHARACTERISTICS:
Gloss (>40 at 60 degrees @ glossmeter)
FLEXURAL STRENGTH:
9,610 psi @ ASTM D790- 1/2”X1/2” bars span 4”
COMPRESSIVE STRENGTH:
9,900 psi @ ASTM D695
TENSILE STRENGTH:
6,680 psi @ ASTM D638
ADHESION:
425 psi @ elcometer (concrete failure, no delamination)
ULTIMATE ELONGATION:
4.7%
HARDNESS:
Shore D = 88
GARDNER VARIABLE IMPACTOR:
50 inch pounds direct – passed
ABRASION RESISTANCE:
Taber abraser CS-17 calibrase wheel with 1000 gram total load and 500
cycles= 20 mg loss
VISCOSITY:
Mixed = 2200-2700 cps (typical)
DOT CLASSIFICATIONS:
Part A “not regulated”
Part B “CORROSIVE LIQUID N.O.S., 8, UN1760, PGIII”