Name: Turning Point Supply - Concrete Products
Price range: $

Product Description

MicroTek™ One Coat Micro Topping is a thin concrete overlay mix that can be applied on floors and walls. Available in a white or gray mix, our thin overlay can be colored with any of our 30 standard overlay colors.

Coverage Approx 200-300 square foot (Varies based on substrate and application)
VOC Rating 0 g/L
Shelf Life 1 year in the original unopened container
Mixing Ratio 5-6 quarts water per 40 lb bag
Base Color White or Gray
Density 126.1 lbs/cubic foot
Compressive Strength ASTM C-109: 4,278 PSI @ 28 days
Flexural Strength ASTM C-348: 995 PSI @ 28 days
Tensile Strength ASTM C-190: 440 PSI @ 28 days
Abrasion Resistance ASTM D-4060: 28 days %loss – 500 cycles – less than 0.50%
Mosaic Shear ANSI A 118.4: 280 PSI @ 28 days

In Stock in both our Charlotte and Raleigh North Carolina store locations.

DESCRIPCIÓN
MicroTekTM One Coat es un recubrimiento extremadamente delgado de un solo componente, autoadhesivo, a base de cemento, para superficies de concreto interior.
MicroTek One CoatTM fue diseñado para producir un acabado de llana excepcionalmente liso y ceñido que puede proporcionar un nuevo "lienzo en blanco" para pisos de concreto decorativo. También se puede colocar verticalmente en paredes interiores, creando
el aspecto de yeso veneciano. La aplicación se realiza por llana o "llana mágica. "MicroTek One CoatTM se prepara con cemento gris o cemento blanco que puede aceptar
un paquete de SC Color

Mixing Micro Topping Concrete Overlay

Add approximately 5 quarts (4.7 liter) water to an empty 5 gallon (18.9 liter) bucket.

2. Add 1 color pack of SC Color if desired. Caution: Color Packs may streak, as color particulate is larger than the aggregate of the mix. See SC Color TDS.

3. Mix with a handheld concrete mixer, such as an Eiben-stock model #EHR 20R or a half-inch (12.7 mm) 450 – 600 rpm drill equipped with a cage mixing blade. SC Color requires comprehensive mixing in water prior to the introduction of Micro-topping.

4. With the mixer running, slowly introduce MicroTek One Coat into the pail.

5. Scrape the side of the pail with a margin trowel to ensure all dry product is incorporated into the wet mix.

6. Continue to mix for a minimum of one minute after all ingredients are combined to achieve a lump-free consistency.

7. Additional water may be added, up to six quarts (5.7 liters) total, per 40- pound (18.1 kg) bag.