Stamp Liquid Release Agent for Concrete
Stamp Liquid Release Agent for Concrete
Liquid Release is a clear colorless release agent for use with concrete stamps and texture tools. The bubble gum scented liquid creates a lubricating barrier that prevents concrete from adhering to tools and extends the life of stamps and skins. Liquid Release leaves no residues as it evaporates reducing clean-up labor costs.
Product Request
Liquid Release for Stamped Concrete
Typical Uses
- Freshly placed stamped concrete
- Concrete stencils
- Vertical stamped concrete
Product Advantages
- Pleasant bubble gum scent
- Long Dwell Time
- Slow Evaporation
- Leaves No Residue
Packaging
- 5-gallon pails
- 1-gallon jugs
COVERAGE
Typically 150-200 square feet per gallon, varies with surface porosity, texture, and environmental conditions.
Dry Time – 1 to 2 hours
Application Temperature - 50° to 80° F
VOC Content – not applicable
APPLICATION INSTRUCTIONS
Apply in a mist by pump up sprayer on texture tools and the concrete surface, coating the surface as you work across the field. Clean tools with soap and water when done.
SAFETY INSTRUCTIONS
Obtain special instructions before use
Do not handle until all safety precautions have been read and understood. Keep away from heat/ sparks/ open flames/hot surfaces. No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical/ ventilating/ lighting/ equipment. Use only non-sparking tools. Take action to prevent static discharges. Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray. Wash face, hands and any exposed skin thoroughly after handling. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Wear protective gloves/ protective clothing/ eye protection/ face protection.
IF exposed or concerned: Get medical advice/attention
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower
If skin irritation occurs: Get medical advice or attention.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contacts, if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/ doctor if you feel unwell.
IF SWALLOWED: Immediately call a POISON CONTROL CENTER/doctor
Do NOT induce vomiting.
Take off contaminated clothing and wash before reuse
In case of fire use, "alcohol resistant" foam, dry chemical, halon or carbon dioxide to extinguish. Collect spillage.