Coverage:
First coat: varies with substrate porosity, typically 180 – 220 sq ft per gallon
Second Coat: 200 – 240 sq ft per gallon
Coverage rates will vary greatly depending on surface porosity and application method. Avoid a thick build of DV-WB. The first coat may be blotchy and uneven due to the substrate's porosity. Always apply a second coat for proper color appearance, coverage, and protection. The product is designed to be applied in thin coats. One thick coat will not be as durable as two thin coats.

Mixing Instructions:
Material should be stirred well prior to application. Long term storage may allow material to separate.
Application Instructions:
DV-WB is to be applied over dry substrates. Natural concrete must cure for at least 28 days. Cement overlays must be dry per their technical data sheet. DV-WB is applied by roller using a 1/2” or 3/4” nap roller covers; choose a nap thickness appropriate to the substrate to prevent puddling in low areas. Sealer should always be applied with thin coats. DV-WB may be applied directly from the bucket or from a roller tray. Care should be used to ensure coats are even by cross rolling the surface after application while the product is still wet. This will help limit roller lines and an even dispersion of the coating.
Clean Up:
Before DV-WB dries completely, tools and spills can be cleaned up with water and a mild detergent.