Solvent Acrylic Sealer Restoration – Restore-A-Seal
Solvent Acrylic Sealer Restoration – Restore-A-Seal
Restore-A-Seal contains a strong blend of key solvents and surfactants designed to emulsify and re-flow old tired acrylic sealers. Thick layers of old sealer with a dingy faded look are made fresh again. Restore-A-Seal penetrates down through the deepest layers of sealer help the acrylics soak back into the concrete substrate, remove trapped moisture and eliminate blushing.
Product Request
TYPICAL USES:
The unique formula used in Industrial, Commercial, and Residential applications such as:
Stamped Concrete
Overlay Products
Stained Concrete
Exposed Aggregate
Broom Finish Concrete
PRODUCT ADVANTAGES:
Removes trapped moisture
Pure Solvents
Works at lower temperatures
Clear non-yellowing formula
PACKAGING
1-Gallon Cans
5-Gallon Pails
COVERAGE:
First Application: 150-250 sq ft per gallon
Second Application: 225 – 350 sq ft per gallon
Coverage rates will vary greatly depending on how many layers of sealer need to be emulsified, application method, and original surface porosity.
Dry Time, Tack Free – 30 to 60 minutes
Dry Time, Foot Traffic – 4 to 6 hours
Dry Time, Heavy Traffic – 24 to 48 hours
Recoat Interval – 4 to 24 hours
Application Temperature - 50° to 80° F
VOC Content - < 100 g/L
MIXING INSTRUCTIONS:
The material should be stirred well prior to application. Long term storage may allow material to separate.
APPLICATION INSTRUCTIONS:
Apply using a solvent-resistant sprayer designed for this use. Restore-A-Seal may also be rolled using a ½” or 3/4” nap roller. The solvent should be applied evenly to the surface and allowed to breakdown the existing sealer. Use enough product to completely re-wet the existing sealer through to the bottom layer. A second treatment may be applied 4 to 24 hours later with the same methods if needed. Allow the sealer 24 hours to dry before returning to foot traffic. 48 hours to heavy traffic.