Ameripolish® 3D (3 densifiers in one product) Hybrid Silicate Densifier improves surface performance and resists the harmful effect of traffic wear and weathering.
By having 3 different size molecule silicates this product fully penetrates varying densities of concrete regardless of region or hardness. This improves the abrasion resistance for new or aged concrete. 3D HS is ideal for use on exposed and polished concrete, as well as cement with integral color.
Dilution & Coverage
Ameripolish® 3D HS is a Concentrate product and should be mixed 1:1 with water. Ameripolish® 3D HS covers 600-800ft2 depending on concrete porosity.
Application - Polished Concrete
1. Perform the main grind using up to 200-grit resin or equivalent resin bond diamond.
2. Remove all dust and debris using an automatic floor scrubber and freshwater. Allow time to dry.
3. Spray 3D HS with overlapping circular motion. Lightly use pad applicator fitted with Ameripolish® Microfiber Pad to spread evenly on the surface. The product does not need vigorous scrubbing-in and will not form a gel. As the product is absorbed into the surface, apply the additional product as needed until the floor starts to reject the product. Keep floor wet for 15 minutes, spreading with a mop to avoid puddles. Allow time to dry.
3DHS-5 48 lbs. 5 gallons RTU
3DHS-30 291 lbs. 30 gallons RTU
3DHS-55 531 lbs. 55 gallons RTU
3DHS-250 2,445 lbs. 250 gallons RTU