Concrete Joint Filler Products That Protect and Repair Industrial Floors

Our selection of Metzger/McGuire concrete joint filler products are among the best in the industry. If you need to repair an industrial or commercial concrete floor, these epoxies and polyureas are sure to deliver stability and protection. Whether repairing contraction/control or construction joints, the Metzger/McGuire product selection allows you to find a repair solution that best suits your needs. Products we offer include semi-rigid and structural epoxies and polyureas, which are designed to repair different types of concrete floor joint issues. Whether you need to restore traffic right away, you are repairing a floor in a freezer or cooler, or you need a colored repair filler, we can match your requirements.

MM-80 Semi-Rigid Epoxy Joint Filler

MM-80 is a 100% solids, two-component, heavy-duty semi-rigid epoxy joint filler designed to fill and protect contraction and construction joints in industrial concrete floors. The industry’s first semi-rigid joint filler and still widely known as the “industry standard” in-floor joint protection. Shore A Hardness: A 90-95. MM-80 was developed to fill and protect joints in industrial concrete floors that are subject to hard wheeled material handling traffic and heavy loads. Its primary function is to support such traffic and protect joint edges. MM-80 is designed for use in areas where final temperatures are from 40˚F to +120˚F. It is also ideal for joint and cracks repair.

Information Links:

Tech Data     Español     SDS     Installation     Color Chart     

Spal-Pro RS 88 Concrete Floor Joint Filler for High Traffic Areas

Spal-Pro RS 88 is a 100% solids, two component heavy duty, semi-rigid polyurea joint filler intended for use in filling and protecting contraction and construction joints in industrial, retail, or commercial concrete floors. Shore A Hardness: A86-90. Spal-Pro RS 88 was developed to fill and protect joints in trafficked industrial and retail concrete floors. Its primary function is to support such traffic and protect joint edges. Spal-Pro RS 88 is intended for use where final temperatures are from 32˚F to +120˚F. Spal-Pro RS 88 is also ideal for filling random cracks in industrial floors.

Information Links:

Tech Data     Español     SDS     Installation     Color Chart     More Info

Edge-Pro 90 Rapid Setting Polyurea Joint Filler

The New Industry Standard for Industrial Concrete Floors. Edge-Pro 90’s revolutionary new chemistry provides for heavy-duty durability, a flush finished profile, and better moisture tolerance than many comparable polyurea joint fillers. Edge-Pro 90 is a two-part, 100% solids, rapid-setting polyurea polymer liquid system. When cured, Edge-Pro 90 is a rubberlike solid. Shore A Hardness: A90-92. Edge-Pro 90 was developed to fill and protect joints in heavy-duty industrial concrete floors subjected to frequent and demanding traffic. Its primary function is to protect joint edges from spalling under material handling vehicle traffic. Edge-Pro 90 is intended for use where final operating temperatures are from 20°F to +120°F.

Information Links:

Tech Data     Español     SDS     Installation     More Info

MM-80P Heavy Duty Semi-Rigid Epoxy Joint Filler

MM-80P is a 100% solids, two-component, heavy duty semi-rigid epoxy joint filler designed to fill and protect contraction and construction joints in industrial concrete floors. MM-80P is a rebalanced version of our MM-80 offering a 1:1 mix ratio for use with dual component pumps. MM-80P was developed to fill and protect joints in industrial concrete floors that are subject to hard wheeled material handling traffic and heavy loads. Its primary function is to support such traffic and protect joint edges from spalling. MM-80P is designed for use in areas where final temperatures are from 40˚F to +120˚F. It is also ideal for joint and crack repair.

Information Links:

Tech Data     Español     SDS     Installation     Color Chart     More Info

Spal-Pro RSF Joint Filler for Industrial and Freezer/Cooler Concrete Floors

This Joint Filler can be Used at Temperatures Down to -30 Degrees. Spal-Pro RSF is a 100% solids, two component heavy duty, semi-rigid polyurea joint filler intended for use in filling and protecting contraction and construction joints in industrial and freezer/cooler concrete floors. RSF can be applied in temperatures as low as -30ºF. Spal-Pro RSF was developed to fill and protect joints in concrete floors that are subject to hard wheels and heavy loads. Its primary function is to support such traffic and support joint edges. Spal-Pro RSF is designed for use in areas where final temperatures are from 120˚F to -30˚F. Spal-Pro RSF is also ideal for filling random cracks.

Information Links:

Tech Data     SDS     Installation     More Info

Concrete Joint Filler Products That Protect and Repair Industrial Floors

Our selection of Metzger/McGuire concrete joint filler products are among the best in the industry. If you need to repair an industrial or commercial concrete floor, these epoxies and polyureas are sure to deliver stability and protection. Whether repairing contraction/control or construction joints, the Metzger/McGuire product selection allows you to find a repair solution that best suits your needs. Products we offer include semi-rigid and structural epoxies and polyureas, which are designed to repair different types of concrete floor joint issues. Whether you need to restore traffic right away, you are repairing a floor in a freezer or cooler, or you need a colored repair filler, we can match your requirements.

Industry Standard Joint Fillers and Repair Products for Concrete Floors

Metzger/McGuire concrete joint filler products and other concrete maintenance products have been setting the industry standard for more than 40 years. We have products that will repair cracks, spalls, gouges, missed saw cuts, joint deterioration, and pop-outs.

 

Epoxy Joint Filler Products To Protect and Repair Concrete Floor Joints and Surfaces

Metzger/McGuire epoxy joint filler products are designed for use on industrial concrete floors. Semi-rigid epoxy control joint filler products are designed to fill and protect contraction and construction joints in industrial concrete floors. Other structural fillers are used to protect interior floors from heavy industrial traffic. Due to their extended working pot life, Metzger/McGuire epoxy fillers can all be mixed by hand, and they allow for the addition of sand or aggregates if desired.

 

Polyurea Joint Filler Products To Repair Concrete Floor Cracks and Surface Defects

We offer two types of Metzger/McGuire polyurea floor products, semi-rigid and structural, to suit different repair needs. Polyurea joint filler products are designed for use on indoor industrial, retail, or commercial polished concrete floors. While semi-rigid polyurea fillers are primarily used for concrete crack and joint repair, structural fillers are best used for surface repairs. Polyureas are durable and are designed to withstand pedestrian traffic and the weight of hard wheels, heavy loads, and carts shortly after application. During new construction work, polyurea products ensure that other trades can continue to operate on the floor within about an hour of application.

Semi-rigid polyurea control joint fillers can be used to fill joints in a newly placed concrete floor or to repair joints on an existing floor. They are also a good choice for repairing cracks that are subject to movement or that may continue to open during the concrete drying-shrinkage process. Additionally, polyurea joint fillers are also an excellent choice for applications in freezer and cooler buildings, as they cure at temperatures as low as -30°F.

Structural polyurea fillers are used to structurally repair or rebuild concrete surfaces through the restoration of all types of surface defects such as popouts, gouges, bolt holes, cracks, etc. When used in combination with sand or aggregates, they are ideal for rebuilding joint edges or broken slab panel corners. Due to their excellent adhesion and low viscosity, structural polyureas can also be used as grouting or resurfacing products when the need exists to fill large areas of surface pitting or micro pits in concrete floors before they are polished.

Most Metzger/McGuire polyurea products are available in 72 standard ColorFast colors with limitless custom color options available upon request.

Metzger/McGuire polyurea joint filler products and other concrete crack repair and maintenance products have been setting the standard in our industry for more than 20 years. We proudly carry Metzger/McGuire products that will repair cracks, spalls, gouges, missed saw cuts, joint deterioration, and pop-outs.

Additional information on epoxy concrete joint fillers and polyurea control joint fillers available at Turning Point Supply in Charlotte North Carolina and in Raleigh North Carolina.

Metzger McGuire MM-80 Epoxy Joint Filler Material for North Carolina and South Carolina

MM-80’s superior formulation yields sufficient rigidity to support loads crossing joints, protecting edges from spalling, and sufficient resiliency to prevent brittleness throughout the floor’s life. MM-80 is also available in a silicone-free version for use in paint and automobile facilities. Please contact us for more details. MM-80’s relative hardness has been gradually increased through the years to reflect increasing demands on floors created by heavier loads and smaller, harder vehicle wheels. MM-80 is the joint filler upon which ACI and PCA standards are based. You can specify and use MM-80 with the confidence that comes from a project-proven track record of more than forty-five years, and with the knowledge that you are relying on the best floor joint protection available in the industry.

HARDNESS, SHORE “A” @ 70˚F D-2240 A90-95

TENSILE STRENGTH D-638 1300 PSI

TENSILE ELONGATION*(@ 70˚F) D-638 45-55%

ADHESION TO CONCRETE D-4541 300-350 PSI

POT LIFE @ 70˚F – 15-30 MINS.

INITIAL CURE @ 70˚F – 6-8 HOURS

LIGHT TRAFFIC READY @ 70˚ F – 6-8 HOURS

FULL TRAFFIC READY @ 70˚ F – 8-12 HOURS

MIX RATIO (by volume) – 5:1

MIX RATIO (by weight) – 100:15

SOLIDS CONTENT – 100%

SHRINKAGE – Negligible

Metzger McGuire Spal Pro RS 88 Polyurea Joint Filler in North Carolina and South Carolina

Spal-Pro RS 88 is a rapid-setting polyurea polymer liquid of 100% solids content. When cured, Spal-Pro RS 88 is a gray, rubberlike solid with a hardness of Shore A86-90.

Basic Use

Spal-Pro RS 88 was developed to fill and protect joints in trafficked industrial and retail concrete floors. Its primary function is to support such traffic and protect joint edges. Spal-Pro RS 88 is intended for use where final temperatures are from freezing to over 120 degrees.

Spal-Pro RS 88 is Rated “Heavy-Duty”

Unlike softer polyureas, Spal-Pro RS 88’s higher shore hardness provides greater edge protection and support.

  • Spal-Pro RS 88 is “Rapid-Setting”

At 70˚F (21˚C) it can be opened to full traffic in as little as (60) minutes and light traffic in (30) minutes.

  • Spal-Pro RS 88 is Colorfast

Spal-Pro RS 88 maintains a consistent color profile and resists fading and other discoloration under normal conditions.

  • Spal-Pro RS 88 is Ideal for Use in Stained/Polished Floors

Spal-Pro RS 88 can be used to fill joints and cracks in polished concrete floors, and will not smudge or smear during grinding/polishing.

HARDNESS, SHORE “A” @ 70˚F D-2240 A86-90

TENSILE STRENGTH D-638 970 PSI

TENSILE ELONGATION*(@ 70˚F) D-638 180%

ADHESION TO CONCRETE D-4541 350-400 PSI

TACK FREE @ 70˚F – 5 Minutes

TRAFFIC READY @ 70˚ F – 1 Hour

MIX RATIO (by vol.) – 1:1

SOLIDS CONTENT – 100%

SHRINKAGE – Negligible

Metzger McGuire Edge Pro 90 Heavy Duty Fast Setting Polyurea Concrete Joint Filler for North Carolina and South Carolina

Edge-Pro 90 Heavy Duty Polyurea Joint Filler is the first product to offer heavy duty performance and durability comparable to our legendary MM-80 Heavy Duty Epoxy Joint Filler and can fill and protect joint edges in the most demanding industrial floor settings such as warehouses, distribution centers and manufacturing facilities.

Edge-Pro 90’s revolutionary new chemistry provides for heavy duty durability, a flush finished profile and better moisture tolerance than many comparable polyurea joint fillers.

  • Edge-Pro 90 Finishes Flusher with the Floor Surface. Edge Pro 90’s chemistry permits for a wider shave window in which the installer can razor off overfill and achieve a consistently flush profile with floor surface.
  • Edge-Pro 90 is Less Reactive to Moisture. Edge-Pro 90 is less reactive to moisture than comparable

polyurea fillers and its special adhesion enhancers permit better adhesion to moist substrates with minimal compromise as compared to dry substrates.

  • Edge-Pro 90 is Colorfast. Edge-Pro 90 maintains a consistent color profile and resists fading, yellowing or other discoloration under normal conditions.
  • Edge-Pro 90 Provides Unequalled Durability. Edge-Pro 90 is the first heavy duty polyurea to provide

comparable properties and durability to our Industry Standard MM-80 and MM-80P Heavy Duty Epoxy Joint Fillers. Additional benefits include rapid access time to floor areas, reduced material loss through joint shrinkage crack, and no heating.

HARDNESS, SHORE A @ 70°F D-2240 90-92

TENSILE STRENGTH D-638 920 psi

TENSILE ELONGATION D-638 238%

ADHESION TO CONCRETE D-4541 300-350 psi

VISCOSITY PART A POLYOL – 1535 cP

VISCOSITY PART B ISO – 2500 cP

TACK FREE @ 70°F – 10-15 minutes

GEL TIME @70°F – 45-50 seconds

TRAFFIC READY @70°F – 45 minutes

MIX RATIO (BY VOL.) – 1:1

.Metzger McGuire MM 80 P Epoxy Joint Filler for Pump Application 1:1 ratio North Carolina and South Carolina

MM-80P is a specially rebalanced formulation of our standard MM-80 designed to achieve optimal placement and curing characteristics when dispensed through dual-component pump systems. MM-80P’s 1:1 mix ratio ensures compatibility with most pump systems and permits accurate and simple ratio monitoring. MM-80P‘s superior formulation yields sufficient rigidity to support loads crossing joints, protecting edges from spalling, and sufficient resiliency to prevent brittleness throughout the floor’s service life. MM-80P is formulated using the chemical backbone of our standard MM-80, the joint filler upon which ACI and PCA standards are based and the only joint filler that has a project proven track record of providing the best floor joint protection in the industry for more than forty-five years.

HARDNESS, SHORE “A” @ 70˚F D-2240 A90-95

TENSILE STRENGTH D-638 1200 PSI

TENSILE ELONGATION*(@ 70˚F) D-638 80-90%

ADHESION TO CONCRETE D-4541 300-350 PSI

POT LIFE @ 70˚F – 10-15 MINS.

INITIAL CURE @ 70˚F – 5-8 HOURS

LIGHT TRAFFIC READY @ 70˚ F – 5-8 HOURS

FULL TRAFFIC READY @ 70˚ F – 8-12 HOURS

MIX RATIO (by volume) – 1A:1B

SOLIDS CONTENT – 100%

SHRINKAGE – Negligible

Metzger McGuire Spal Pro RSF Rapid Setting Polyurea Control Joint Filler for North Carolina and South Carolina

Spal-Pro RSF is a rapid-setting, two-component polyurea polymer liquid of 100% solids content. When cured, Spal-Pro RSF is a medium gray, rubberlike solid with a hardness of Shore A88-94, depending on temperature. Spal-Pro RSF was developed to fill and protect joints in concrete floors that are subject to hard wheels and heavy loads. Its primary function is to support such traffic and support joint edges. SpalPro RSF is designed for use in areas where final temperatures are from 120˚F to -30˚F. Spal-Pro RSF is also ideal for filling random cracks.

Spal-Pro RSF is Rated “Heavy-Duty”

Unlike flexible polyureas, RSF’s higher shore hardness provides greater edge protection and support.

Spal-Pro RSF is “Rapid-Setting”

At 0˚F (-18˚C) RSF can be opened to construction traffic in as little as (3) three hours after placement.

Spal-Pro RSF Will Not Become Brittle

Even at temperatures far below freezing, RSF retains its hard, rubber-like character.

Spal-Pro RSF is a “Superior Formulation”

You get consistent cure and quality in demanding freezer/cooler environments.